Sdscompany.ru

Компьютерный журнал
0 просмотров
Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд
Загрузка...

Ошибка 0х80040600 outlook

Ошибка 0х80040600 outlook

Question

I HAVE REVIEWED OTHER QUESTIONS AND ADVICE ABOUT THIS ERROR.

We are seeing a send/receive error in Outlook 2013, details are «Unknown error 0x80040600». The problem is preventing send and receive of email to certain accounts, while permitting it to other accounts.

Virtually all questions and all advice found so far relates to earlier versions of Outlook, and the advice for dealing with the error cannot be followed here. For example, the SCANPST.EXE program does not appear to be on the affected system, so we can’t repair the PST file as advised. If a new PST file is created and made default, we cannot import messages from the old file as advised. Outlook will appear to be working for hours on updating it when we mount it and try to open it, but will not display any items in it.

Yesterday, it did this on one of about ten email accounts managed by this Outlook client, the others continued to send/receive just fine. We eventually restored a backup of the PST file and lost a couple of days of email, but everything worked fine again. Minutes ago, Outlook began reporting the same error with a different account.

Help please! Thanks for any advice or ideas.

  • Edited by boyscout100 Monday, February 10, 2014 4:25 PM

Answers

First of all, there are three reasons that may cause your problem, as follows:

1. Your Outlook PST file is damaged or corrupt.
2. Your Outlook profile is corrupt.
3. Your Outlook installation or configuration is incorrect.

To determine the accurate reason, you can do as follows:

Copy your PST file to another computer with Outlook installed, then start Outlook, then «File» -> «Open» -> «Outlook Data File», to open the PST file.
If the PST file cannot be opened, or there are some error messages when opening the file, then your PST file is corrupt and you need to go to (SOLUTION A),
otherwise, if the PST file can be opened without any problems, then your PST file should be healthy and the reason is 2 or 3, you need to go to (SOLUTION B).

(SOLUTION A): There are a lot of online resources discussing about how to recovering corrupt or damaged PST files.

First, the Microsoft offical tool scanpst, also called Inbox Repair Tool, can repair the PST file, you can refer the following articles:

http://office.microsoft.com/en-001/outlook-help/repair-outlook-data-files-pst-and-ost-HA010075831.aspx
http://support.microsoft.com/kb/272227
https://support.microsoft.com/kb/287497

If scanpst fails, then you can use third-party Outlook recovery tools such as DataNumen Outlook Repair . It provides a free trial so you can try first to see if it works before purchase it.

(SOLUTION B) In such a case, you can create a new profile on your original computer, and associate the PST file with that new profile, and then remove the old profile and set the new profile as the default one, then restart your Outlook to see if that works. If it still does not work, then your Outlook installation is incorrect and you may need to reinstall Outlook or even Office suite.

Quick Fix: Outlook Receiving reported error (0x80040600) during Send/Receive.

Problem description: You use Outlook 2003, Outlook 2007, Outlook 2010 or Outlook 2013 and you receive the following error during Send-Receive procedure: «Receiving reported error (0x80040600): Unknown Error 0x80040600 (0x80040600)».

Читать еще:  Ошибка документов в очереди 1

The Outlook «0x80040600» error can occur in any version of Outlook (2003, 2007, 2010 or 2013) and usually means that the Outlook archive file (commonly named «Outlook.pst») has been corrupted or damaged because of a power corruption, disk damage, or other unknown reasons. In this case you have to repair the Outlook PST file using the Microsoft’s Outlook Inbox Repair Tool (Scanpst.exe).

How to solve 0x80040600 error code in Outlook 2003, 2007, 2010 or 2013.

Step 1. Enable Hidden files & folders view.

Before continue to resolve the ‘0x80040600’ error, first enable the Hidden files view. To do that:

  • Open Windows Control Panel:
    • Open Folder Options.
      • Click the View tab.
        • Checkto enable the Show hidden files, folders, and drivesoption.
      • Click OK

Step 2. Run the inbox Repair Tool – SCANPST.EXE.

1. Close Outlook.

2. Open Windows explorer and locate the scanpst.exe repair tool at this location:

  • C:Program FilesMicrosoft Office%OfficeVersion%SCANPST.EXE

3. Double-click to open SCANPST.EXE

4. Click Browse.

5. Locate the corrupted Outlook data file (e.g. Outlook.pst) at this location:

Windows XP

  • C:Documents and Settings%Username%Local SettingsApplication DataMicrosoftOutlookOutlook.pst

Windows 7 or Vista

  • C:Users%Username%AppDataLocalMicrosoftOutlookOutlook.pst

Note: In Outlook 2016, 2013 & 2010, the Outlook Data file is stored by default at:

  • C:Users%Username%DocumentsOutlook FilesOutlook.pst

6. Press the Scan button and be patient until the Inbox Repair Tool repairs the corrupted file. *

* Note: At final repair phase you will be asked if you want to create a backup. Answer «Yes» to continue the repair operation.

That’s all folks! Did it work for you?

Please leave a comment in the comment section below or even better: like and share this blog post in the social networks to help spread the word about this solution.

How to Repair PST File after Outlook Error 0x80040600?

Often, when user utilizes ‘Send-Receive’ option to refresh the Microsoft Outlook emails, below shown error erupts on computer screen:

This error stops all the Outlook activities to continue and unable user from accessing any Outlook related file or folder. It can occur on any version of MS Outlook. User can primarily use inbuilt tools like ‘scanpst.exe’ to fix this issue. Follow the below mentioned steps to get rid of this error:

  1. Close Outlook in order to Run the inbox Repair Tool (SCANPST.EXE)
  2. Click the Search option from Start menu and type the following command to locate the scanpst.exe repair tool:
  3. Open SCANPST.EXE and click Browse to locate the affected or corrupted Outlook PST file
  4. Click the Scan button to start the recovery process
  5. A message will prompt on screen, asking to create a backup, click OK and continue

Outlook error 0x80040600 occurs generally due to overloaded PST files. Every MS Outlook version has its limit to store PST files, which should be maintained and kept a check time to time. When user exceeds the storage capacity of PST files then either gets corrupted or omitted automatically then eventually displays this particular error 0x80040600. This error can also occur due to virus attack on the user’s personal system or due to the utilization of improper or corrupted external device or software.

  • Maintain a regular backup of PST files. This is necessary and useful at the time of version upgrade or file recovery
  • As soon as you suspect PST file corruption first handedly, look for the potential remedy and avoid abrupt application closure as much as possible
  • Remove unnecessary emails and data carried by PST files and folders to prevent full storage limit issues
  • Keep a check on antivirus program’s updates and use only authenticated softwares
  • Close your MS Outlook application, then all other running apps and avoid abrupt system closure
  • Modify the storage limit of PST files in the versions providing this facility otherwise never exceed them above 2GB limit
Читать еще:  Steam exe ошибка приложения

The above-mentioned methods to prevent MS Outlook corruption issues are highly beneficial. If user encounters Outlook errors, even after following the prevention rules then, you can very well opt third party PST repair tool. Kernel for Outlook PST repair software is prominent software possessing similar capabilities. It fixes the persisting error and produces fresh PST files immediately. Checkout below mentioned steps the software follows for instant recovery of affected PST files:

  1. Download software setup and launch the software.
  2. Choose either Browse option (known location) or Search option (unknown location) to locate the PST files.
  3. After selecting the source of PST file, select Repair multiple or Repair single file option as per requirement.
  4. Select Recovery mode and click Finish button to begin the recovery process.
  5. Software will Scan and fix the error 0x80040600 then, enlist the recovered PST files in hierarchical manner.
  6. Click Preview option to verify the file contents and attributes.
  7. Select Save button and choose desired file format from Select Output type option to save the recovered files.

Following these option users will retrieve 100%complete PST files and can then access Outlook files flawlessly.

Руководство по Крепление 0x80040600 Ошибка

Что 0x80040600 Ошибка?

0x80040600 распространенная ошибка, что становится особенно огорчает для пользователей Outlook.

Эта ошибка не позволяет пользователям отправлять или получать сообщения электронной почты через Microsoft Outlook. Пользователи могут также столкнуться с этой проблемой в то время как изменения в запись в календаре или добавление нового контакта. Там нет очевидной сообщение, которое отображается для пользователя, когда происходит эта ошибка.

Тем не менее Outlook отображает смутное сообщение, содержащее код 0x80040600.

Решение

Скачать можно восстановить все потерянные данные Outlook,

Рекомендуем: Скачать Outlook PST Repair Utility для безопасного восстановления электронной почты, календаря и контактов все данные PST.

Сертифицированный сейф, вирусов бесплатно. Ошибка Инструменты Выбор редактора.

Причины ошибок

Основной причиной этой ошибки является проблема с файлом PST. Когда файл PST поврежден, отсутствует или поврежден, эта ошибка возникает сразу. Файл PST по существу важным файл, который хранит важную информацию и ничего счетов индивида.

Иногда эта ошибка происходит потому, что файл поврежден, а в других случаях, причина того, что это происходит потому, что файл слишком полный, чтобы приспособить любую дополнительную информацию.

Независимо от причин этой проблемы, важно, чтобы эта ошибка быстро фиксируется, чтобы обеспечить надлежащее и бесперебойное функционирование перспективы в будущем.

Дополнительная информация и руководство по ремонту

Ошибка возникает потому, что приложение Перспективы сталкивается с проблемами при попытке получить, отправить или прочитать электронную почту. Некоторые решения, которые могут творить чудеса и поможет вам избавиться от проблемы, изложены ниже.

  • Как только появится ошибка, первое решение, чтобы перезагрузить систему. Это первое, что должно быть сделано, потому что много раз, эти ошибки могут быть удалены просто перезагрузить систему. Это, следовательно, сэкономить пользователю неудобства вручную устранить эту проблему.
Читать еще:  Ошибка предварительного просмотра

Если перезапуск системы не решить проблему и отображается сообщение об ошибке снова, он сообщил, пользователь использует ‘Входящие Repair Tool «.

Это наиболее часто используемый и эффективный подход к фиксации поврежденного файла PST. Процедура устранения этого файл таблицы Personal Storage или PST файл перечислены ниже.

  • Перейти к меню. Введите Выполнить и запустите Входящие Repair Tool, введя следующий путь: Название диска: Program Files Common Files System Mapi Код языка scanpst.exe. Теперь нажмите OK. Появится всплывающее сообщение. Введите имя файла и путь к файлу PST поврежден. Теперь нажмите на кнопку «Пуск». Здесь важно отметить, что инструмент Входящие ремонта может занять много времени, в зависимости от размера файла и количества данных, которые должны быть восстановлены. Тем не менее, это наиболее эффективный способ решение этой проблемы.

Как установить и запустить Stellar Phoenix Outlook PST Ремонт

Quick Fix: Outlook Receiving reported error (0x80040600) during Send/Receive.

Problem description: You use Outlook 2003, Outlook 2007, Outlook 2010 or Outlook 2013 and you receive the following error during Send-Receive procedure: «Receiving reported error (0x80040600): Unknown Error 0x80040600 (0x80040600)».

The Outlook «0x80040600» error can occur in any version of Outlook (2003, 2007, 2010 or 2013) and usually means that the Outlook archive file (commonly named «Outlook.pst») has been corrupted or damaged because of a power corruption, disk damage, or other unknown reasons. In this case you have to repair the Outlook PST file using the Microsoft’s Outlook Inbox Repair Tool (Scanpst.exe).

How to solve 0x80040600 error code in Outlook 2003, 2007, 2010 or 2013.

Step 1. Enable Hidden files & folders view.

Before continue to resolve the ‘0x80040600’ error, first enable the Hidden files view. To do that:

  • Open Windows Control Panel:
    • Open Folder Options.
      • Click the View tab.
        • Checkto enable the Show hidden files, folders, and drivesoption.
      • Click OK

Step 2. Run the inbox Repair Tool – SCANPST.EXE.

1. Close Outlook.

2. Open Windows explorer and locate the scanpst.exe repair tool at this location:

  • C:Program FilesMicrosoft Office%OfficeVersion%SCANPST.EXE

3. Double-click to open SCANPST.EXE

4. Click Browse.

5. Locate the corrupted Outlook data file (e.g. Outlook.pst) at this location:

Windows XP

  • C:Documents and Settings%Username%Local SettingsApplication DataMicrosoftOutlookOutlook.pst

Windows 7 or Vista

  • C:Users%Username%AppDataLocalMicrosoftOutlookOutlook.pst

Note: In Outlook 2016, 2013 & 2010, the Outlook Data file is stored by default at:

  • C:Users%Username%DocumentsOutlook FilesOutlook.pst

6. Press the Scan button and be patient until the Inbox Repair Tool repairs the corrupted file. *

* Note: At final repair phase you will be asked if you want to create a backup. Answer «Yes» to continue the repair operation.

That’s all folks! Did it work for you?

Please leave a comment in the comment section below or even better: like and share this blog post in the social networks to help spread the word about this solution.

Ссылка на основную публикацию
Adblock
detector